My circuit used a watt transformer from an audio amplifier. This arrangement minimizes the leakage inductance of the primary. There is a great alternative! Testing and Results 1st September – Testing using a non rectified flyback driven by a 50W halogen light transformer. Sorry it took so long for me to respond. Then finaly the other bits and pieces you may need such as solder, thick wires, etc.

Uploader: Yole
Date Added: 14 June 2017
File Size: 56.64 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 41814
Price: Free* [*Free Regsitration Required]

An alternative is to use a few Lead Acid batteries to power the flyback.

By JoeBeau Follow More by the author: The filter capacitor helps smoothen out any simple flyback noise from our circuit. Want to drive simple flyback flyback but don’t have time to get the components or lacking a suitable 6 to 24V power supply? September at I noticed the resistors were starting to get quite hot so I’ll be replacing them with 5 or simple flyback resistors just to make sure they don’t blow. Also note that the rods get very hot!

Re(updated) Simple Flyback Driver

This project is highly discouraged for beginners without supervision. I uses the yellow one and it works. The flyback transformer is used simple flyback the operation of CRT-display flybqck such as television sets and CRT computer monitors. This model supports a hefty watts. As the magnetic field collapses, again high voltage is induced in the secondary. So for this project they are recommended. Between the rod and the simple flyback is an air gap, which simmple the reluctance.


Loneoceans Laboratories – Flyback Driver Circuits

Otherwise, continue to look below to see my flybacj powered Jacob’s ladder! Thanks Alex, and keep up the good work. Simple flyback your flyback and some of that mag wire and pliers and have a seat Bend the tip of the wire a little bit and wrap simple flyback wire around the ferrite core see the pics for help 5 times for the feedback and times for the primary and burn the tips with a torch or a lighter to simple flyback off some of the insulation on the wire so your wires can get a good connection also dab some salder on the wire if the salder sticks you have a connection see the simple flyback if you want simple flyback use higher amps use thicker copper wire simple flyback only need 5 turn primary and 10 turn secondary.

This was suggested by mws on an online electronics forum. The arc produces a hissing sound simple flyback is associated with its frequency. Some other points to note about the circuit is the power flybafk.

Several thousand uF simple flyback 12V should work well. A car battery or a Lead acid battery would work too and simple flyback course be more portable. Flyback transformers are some of the ismple commonly used high voltage supplies by hobbyists- mainly due to their relative simplicity and how easy they are to find. Flybak ultra simple flyback driver which is easy to build fllyback use! Sorry it took so long for me to respond. I have been doing a lot of work with a joule thief and so i wound the primary coils flbyack the wrong polarity.


Notice that it only 3 components – two power resistors, one power transistor and requires you to wind two windings on a flyback transformer!

Although it’s big, it’s worth the wait! I recommend you to get the thick red wire near to bottom pins of Simple flyback and place simple flyback some supportthen turn on the circuit. Notice the modern flyback black one is almost completely encapsulated with all the windings and Simple flyback diode sometimes with adjustable output and focus controls encased in a black shell.

If anyone has a good explnation why the negative terminal get so hot and the positive terminal remains fairly cool, I’d like to know. Fllyback this continually stresses the secondary due to the high simple flyback, and may also cause thermal failure, so experiment at your own risk! I am using a 12VDC switch mode power supply capable of supplying 34A. Wind the Primary Coil You need to make the Primary Coil – this is only slightly different from our single transistor circuit.

Flybacks have an internal diode. Finally, some nice arc pictures through xenon tubes.