ACCEL A WRITER 3N DRIVER

Preventing Paper Jams Adjust the paper guides in the tray and make sure that the pointers on the guides are in the correct position. If it only occurs from a single tray, then observe the pickup rollers and see if they are causing the media to be fed through the printer at an angle. We recommend you set a static IP address to avoid the problem. Handling The Printer Replacing The Controller Board Panel Check both ends to ensure each springs back.

Uploader: Moogur
Date Added: 3 July 2016
File Size: 18.75 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 66435
Price: Free* [*Free Regsitration Required]

You may need to take this roller out and clean it. Selecting The Printer Interface Moving The Printer accel Connecting To The Serial Port Check both ends to ensure each springs back. Removing The Duplexer Skew can be caused by the way the media is fed through the printer.

Xante Accel-a-Writer 3N

Other Helpful Documentation Make sure that they are not laying flat. Turn off the printer for 30 minutes to allow fuser to cool and restart.

New Drivers  SAMSUNG ML2551N DRIVER FOR WINDOWS 7

The problem is either a physical connection or configuration issue. The paper guides in the tray are probably out of place.

The best tool for this is an Ethernet cross-over cable, a cable that connects two devices directly without the need for a hub or switch. If the problem occurs from all trays, perform X-ACT calibration which corrects for skew. Connect the PC directly to the printer using the cross-over cable and test communication.

Xante Accel-a-Writer Accel-a-Writer 3N Manuals

Installing The Paper Cassette Feeder Paper Cassette Feeder To correct this, pull the toner cartridge from the printer and check the metal contacts on the wriiter side of the printer.

Gently pull this out to ensure contact.

Printing On Custom Sized Media If not corrected — contact Technical Support. On occasion, writed sides of the toner cartridge not making good contact can also cause the problem.

Turning The Printer On Templates Workflow Customer Videos Events.

Please contact Technical Support to discuss the options available to correct this. Make sure that you can push this down and it springs back into place.

New Drivers  LINKSYS WPC300N DRIVERS FOR WINDOWS 7

Accel-a-Writer 3G/3N/4G/4N FAQ

Make sure the printer has been rebooted after changing IP parameters. What is this and how can this be corrected? Table of contents Before You Begin Locating Paper Jams This includes a valid IP address, the same wruter mask as is used on the PC, and in some cases, a valid default gateway.

Connecting To The Ethernet Port Adjust the paper guides in the tray and make sure that the pointers on the guides are in the correct position. Reassembling The Printer If it only occurs from a single tray, then observe the pickup rollers and see if they are causing the media to be fed through the printer at an angle.

Optional Paper Feeders